Apply to Customer Service Project Inspector (La Quinta)
Primary Function
Under general supervision, reviews customer service proposals and inspects private electrical contractors’ projects for
adherence to General Orders 95, 128, 165, district standards and Cal-OSHA regulations; locates district underground
utilities, ensures public safety and directs contractors in preventing damage to district facilities; determines whether
customer or contractor work is completed to where district crews can start.
Prepares drawings, work plans, material lists and other documents as needed to facilitate completion of the project. Performs other duties as assigned.
Distinguishing Characteristics
The incumbent is required is to be certified at 600v rubber glove to open secondary pull-boxes, 120/240V single
phase. This position also shares standby and weekend duty responsibilities with other unit staff.
It will be the responsibility of all employees in this classification to report for emergency duty if called.
Lacking a bonafide excuse satisfactory to supervision, a second failure to report when called could result in discharge.
Essential Duties and Responsibilities
The examples of essential functions listed below are representative but not necessarily exhaustive or descriptive and
incumbent may be assigned other related functions not listed herein if such functions are a logical assignment for the
position.
- Reviews customer service proposals and inspects primary and secondary underground distribution projects for adherence to G.O. 95, 128 & 165, district standards and Cal-OSHA regulations.
- Maintains continuous communication with contractors in order to review changes in projects, resolves problems and inspects projects at various phases of construction; tracks and documents procedures.
- Examines visually and verifies location requirements of electrical meter panels and Carson boxes for release; reviews changes submitted by contractors concerning ongoing construction projects, determines if changes are within regulations and authorizes the projects to proceed; notifies customer operations staff of approved changes for mapping; issues correction and other notices when work is not in conformance with codes and standards; may stop project until questions regarding regulations are resolved.
- Verifies construction designs meet standard and regulatory requirements; keeps engineering and project management informed on project status; maintains written records, photos and logs of activities in the field and updates records and reports.
- Prepares notations and rough sketches of infractions, defects and changes and requests contractor prepare asbuilt drawings for ongoing projects.
- Performs and completes all aspects of underground searches, locates and verifies primary and secondary locating services; follows government mandated marking requirements; and ensures timely location markings; communicates to district personnel outcome of the inspection.
- Receives, responds and completes Underground Service Dig-Alert requests from contractors and customers; schedules based on information received on work order requests; uses maps or GIS system to locate and mark electric cable services; communicates and coordinates location and marking information to outside utility companies or contractors who are scheduled to excavate underground cables.
- Determines whether customer/contractor work is completed before district crews begin work; communicates with schedulers and notifies, district personnel to proceed with construction work after inspection is approved.
- Prepares project drawings, work plans, construction material lists for project and other documents as needed to facilitate completion of the project.
- Prepares work service orders on necessary repairs or replacement of equipment regarding transmission or distribution system observed during inspection and as required by supervision.
- Observes installation of customer gear, or other type of contractor work including work which may interfere with district construction crew.
- Patrols and inspects overhead and underground power distribution lines to locate irregularities, physical defects and hazardous conditions.
- Visually inspects substation facilities including capacitors, oil circuit breakers and regulators to locate physical defects and hazardous conditions.
- Performs other duties as assigned.
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The
requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.
Education
- High school equivalency supplemented with college courses in principles of electricity and mathematics.
- Two years of electrical, power line construction, power operations/dispatching or field electrical experience.
- A valid driver license issued by the State of California, Department of Motor Vehicles is required.
- Successfully complete Rubber Glove Certification for 120/240V, single phase within the first six months of probationary period.
Knowledge of:
- Electrical theory and practices related to power transmission and distribution systems.
- National Electrical Code (NEC), General Orders 95 and 128, Title 8, and Cal/OSHA regulations.
- Dig Alert California Government Code 4216 and California Underground Facilities Safe Excavation Board requirements.
- Utility construction methods, procedures, materials, and IID standards, including Standards 181 (Sections 4.1-4.15), 202 (Sections 6.17-6.18), and other applicable policies and procedures.
- Accepted utility construction and safety standards.
- District power system operations, including circuit maps and related documentation.
- Electrical safety work practices and procedures.
- Roadways, highways, and streets throughout Imperial County and the Coachella Valley.
Skills and Abilities
Ability to:
- Perform visual inspections and assess the condition of substations, overhead transmission and distribution lines, and underground utility facilities.
- Respond to Dig Alert customer requests in compliance with California Government Code 4216.
- Complete and maintain required Dig Alert certifications and training.
- Use locating equipment to identify, locate, and mark District-owned underground facilities to prevent damage during excavation activities.
- Open and inspect secondary pull boxes used in Imperial and Riverside Counties in accordance with District Standards 181 and applicable secondary voltage requirements (120/240V, single-phase).
- Read and interpret:
- Customer service proposals
- Construction plans
- Blueprint drawings
- Schematic diagrams
- Electrical orders
- Safety regulations and operating procedures
- Communicate effectively with employees, contractors, customers, and public or private agencies regarding utility-related issues and irregularities.
- Prepare clear, concise reports and maintain accurate records.
- Prioritize workload and meet established schedules and deadlines.
- Perform electrical calculations and apply algebraic and trigonometric principles.
- Accurately prepare, update, and interpret project maps, circuit drawings, and scaled sketches.
- Apply sound judgment and problem-solving skills when working with standardized procedures and multiple variables.
- Utilize computers, software applications, and related technology.
- Work safely around energized equipment and electrical facilities.
- Follow oral and written instructions.
- Maintain dependable attendance and punctuality.
- Foster positive working relationships with coworkers, contractors, customers, agency representatives, and the public.
Tools and Equipment Used
Employees may be required to operate and utilize:
- Computer, telephone, and general office equipment
- Two-way radio and digital camera
- Personal Protective Equipment (PPE)
- Locator equipment, voltmeter, amp meter, transit, level, and measuring devices
- Mandrel, measuring tape, measuring wheel, wood stakes, lath, and spray paint
- Construction plans, maps, logbooks, and computer-generated reports
- Hand tools, including hammer, hatchet, shovel, and manhole lid opener
- Pole rope, gloves, step ladder, binoculars, and hard hat
- District vehicle and related field equipment
Supervisory Responsibilities
- None
Work Environment
Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the position.
While performing the duties of this position, employees regularly:
- Work outdoors in various weather conditions.
- Are exposed to direct sunlight and temperature extremes.
- Work near energized electrical equipment and may be exposed to electrical shock hazards.
- Work near moving mechanical equipment and construction activities.
- Are exposed to dust, fumes, airborne particles, vibrations, and wet or humid conditions.
- Work around open trenches and active construction sites.
- Occasionally work in confined spaces.
- May be exposed to combustible, toxic, or caustic substances.
Physical Demands
Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the position.
While performing the duties of this position, employees regularly:
- Use hands to handle, grasp, manipulate, and operate tools and equipment.
- Sit, stand, walk, climb, and maintain balance.
- Reach in all directions, including overhead and below waist level.
- Communicate effectively through speaking and listening.
- Use hands and feet to safely operate equipment and vehicles.
Additional requirements include:
- Ability to occasionally lift and move up to 50 pounds.
- Ability to occasionally lift and move up to 70 pounds.
- Visual acuity sufficient to perform close work, distance viewing, color recognition, depth perception, peripheral vision, and focus adjustment.
Degree of Physical Effort
Physical Effort Level 4
This position requires moderate to heavy physical activity with demands for strength, coordination, and manual dexterity occurring from several times per day to throughout the workday.